Steaming tray, Steaming rack, Spoon and measuring cup

Valve with seal: 6.70 €
Sealing ring (small): 6.70 €
Sealing ring (large): 6.70 €
Shipping costs: 4.90 € (Germany, Austria, the Netherlands and France)

For spare parts enquiries, please contact: info@firstaustrio.shop

Please note that the availability of spare parts is very limited and the product may not be available at all times. Waiting times may occur.

Aluminium with a non-stick coating

No

1.) Peel off the aluminium cover from the inside of the lid.

2.) Remove the sealing ring from the valve.

3.) Insert the valve through the corresponding opening at the top of the lid.

4.) On the opposite side, reattach the sealing ring to the valve. (To prevent the valve from slipping back whilst attaching the sealing ring, it is best to hold it in place with a suitable skewer, stick or screwdriver.) Once fitted, the valve must be able to move slightly up and down.

5.) Then reattach the aluminium cover – done.

The large sealing ring on the lid is not fitted correctly. Make sure the sealing ring is clean and sits fully against the cover plate.

The pressure inside the pressure cooker is still too high. Release the pressure by turning the pressure release valve to the ‘Release Pressure’ position.

1. The large sealing ring is not fitted to the lid. → Fit the sealing ring correctly to the inside of the lid.
2. The lid’s sealing ring is too dirty. → Clean the sealing ring.
3. The lid is not closed. → Lock the lid.

The seal ring on the float valve is dirty. Clean the small seal ring on the float valve.

1. E1 → Sensor disconnected/malfunction
2. E2 → Sensor short circuit
3. E4 → Pressure switch disconnected/malfunction

If you encounter any of these error codes, please contact our customer service team.